Stock Wish List

[DazMode]

Aquacomputer woke up too, so will get some goodies as well. No am4 stuff, as order is old too.

[nass]

can you remind me what you need?

Need a 150 res ddc
Copper/ ni am4 block 18001 think it is .

[nass]

http://www.aquatuning.us/water-cooli...ssor-copper-ni

[DazMode]

http://www.aquatuning.us/water-cooli...ssor-copper-ni

sorry cannot. agreement with watercool that i dont order any nickel plated parts.

[nass]

Reason Daz flaking ? Should avoid getting that one?

[DazMode]

Reason Daz flaking ? Should avoid getting that one?

no, big backlog on plating parts.

[MackTheKnight]

Hi Daz,

Are you getting any more full cover GPU waterblocks that will fit the 1080ti, in the near future? Ala, EK's Titan Pasal full cover block: https://www.dazmode.com/store/produc...-acetalnickel/

Thanks,
Mack

[DazMode]

yes more to come

[MackTheKnight]

yes more to come

Excellent, thank you

[MemBusX]

I have a new one here.

[ATTACH=CONFIG]4746[/ATTACH]

[ATTACH=CONFIG]4747[/ATTACH]

[ATTACH=CONFIG]4748[/ATTACH]

[ATTACH=CONFIG]4749[/ATTACH]

Heeyy. Just noticed reply. Is that a M20 to G1/4 adapter????

[gdesmo]

Stick around a bit more, yes of course it is.

[warplane95]

Hey, daz. Do you know if this include the AM4 gasket? https://www.dazmode.com/store/produc...y-am4-upgrade/

EKWB sent me the mounting and backing plate two month ago, but I never receive the gasket.

[DazMode]

Hey, daz. Do you know if this include the AM4 gasket? https://www.dazmode.com/store/produc...y-am4-upgrade/

EKWB sent me the mounting and backing plate two month ago, but I never receive the gasket.

no gasket as pictured

[bao]

Hey Daz,

Are you able to bring these in?

https://www.ekwb.com/shop/ek-ddc-heatsink-cover-nickel

I imagine the the run rate could be decent for people that prefer DDC pumps, and are using your darkside fan mount as they would be fully compatible. I bought a BP heatsink for my DDC, and it doesn't install onto the mount as the matching mounting holes are the same place as the main screw holes. I made it work by buying the EK decoupling kit, but the screws are a bit short (still works, but probably not recommended).

Here's the mount:

https://www.dazmode.com/store/produc...ng-acessories/

The 4 holes in the centre are perfectly matched with the DDC stock screw holes. And this EK heatsink + decouple kit allows you to use the heatsink and install via the same holes.

Alternatively, find a source that can replicate the EK decoupling kit where the 'piggy-back' screws which is the secret sauce to resolving this dilemma, are longer. That way the BP heatsink option would still be a very good option for people that want to mount this way.

[DazMode]

Hey Daz,

Are you able to bring these in?

https://www.ekwb.com/shop/ek-ddc-heatsink-cover-nickel

I imagine the the run rate could be decent for people that prefer DDC pumps, and are using your darkside fan mount as they would be fully compatible. I bought a BP heatsink for my DDC, and it doesn't install onto the mount as the matching mounting holes are the same place as the main screw holes. I made it work by buying the EK decoupling kit, but the screws are a bit short (still works, but probably not recommended).

Here's the mount:

https://www.dazmode.com/store/produc...ng-acessories/

The 4 holes in the centre are perfectly matched with the DDC stock screw holes. And this EK heatsink + decouple kit allows you to use the heatsink and install via the same holes.

Alternatively, find a source that can replicate the EK decoupling kit where the 'piggy-back' screws which is the secret sauce to resolving this dilemma, are longer. That way the BP heatsink option would still be a very good option for people that want to mount this way.

nobody ever buys those, so i removed from the store. can do custom order if needed.