Hi Everyone.
Finally, after contemplating to build a watercooled PC for 10 years, i had the time and resources to accomplish the task lol.
The background on this build was to try to bridge the clean, simple look and high efficiency cooling solution and learn in the process.
I have chosen Fractal Design Meshify 2 case for the reason being not seeing a lot of water cooled builds with it as well as the once i have seen seemed too convoluted with people trying to make plumbing work. So i wanted to take a little difference approach by not using the pump/reservoir combo and instead, concealing the water pump under the steel removable panel of the case and making the pass-through design.
I would love to see any feedback, i always want to learn and improve upon the new knowledge.
Intel I9-9900k 5.2Ghz all cores
Gigabyte Aorus Z390 Master
16GB Patriot Viper RGB DDR4-3600 Samsung B-die
Adata XPG SX8200 PCIe Gen3x4 M.2 2280 Solid State Drive 500GB
Gigabyte Aorus GTX 1080TI Extreme Waterforce WB
Corsair HX1200i PSU
Fractal Design Meshify S2 tampered glass case
CableMod C-Series PRO ModMesh Cable Kit for Corsair AXi/HXi/RM - Carbon
EK-Velocity RGB – Nickel + Acetal (Intel)
Biksky 360mm (top) and 280mm (front) Rads
3x Fractal Design Prisma AL-14 PWM fans
3x Fractal Design Prisma AL-12 PWM fans
Barrow 250mm Reservoir with temp sensor
Barrow 17w pump (hidden under the metal panel below the reservoir)
Barrow 14mm OD fittings
EK Fill Port
2x DarkSide 3\8 Flex Tubing Compression Fittings (used to connect the fill port to the reservoir)
5x DarkSide 1/4 plugs
14mm OD PETG tubing
Misc DarkSide extenders and adapters (mostly hidden and used for plumbing the water pump to pass though ports)
1x DarkSide 3way splitter
Mayhems UV Green Pastel Fluid
5 Inch 800x540 LCD screen for statistics
Finally, after contemplating to build a watercooled PC for 10 years, i had the time and resources to accomplish the task lol.
The background on this build was to try to bridge the clean, simple look and high efficiency cooling solution and learn in the process.
I have chosen Fractal Design Meshify 2 case for the reason being not seeing a lot of water cooled builds with it as well as the once i have seen seemed too convoluted with people trying to make plumbing work. So i wanted to take a little difference approach by not using the pump/reservoir combo and instead, concealing the water pump under the steel removable panel of the case and making the pass-through design.
I would love to see any feedback, i always want to learn and improve upon the new knowledge.
Intel I9-9900k 5.2Ghz all cores
Gigabyte Aorus Z390 Master
16GB Patriot Viper RGB DDR4-3600 Samsung B-die
Adata XPG SX8200 PCIe Gen3x4 M.2 2280 Solid State Drive 500GB
Gigabyte Aorus GTX 1080TI Extreme Waterforce WB
Corsair HX1200i PSU
Fractal Design Meshify S2 tampered glass case
CableMod C-Series PRO ModMesh Cable Kit for Corsair AXi/HXi/RM - Carbon
EK-Velocity RGB – Nickel + Acetal (Intel)
Biksky 360mm (top) and 280mm (front) Rads
3x Fractal Design Prisma AL-14 PWM fans
3x Fractal Design Prisma AL-12 PWM fans
Barrow 250mm Reservoir with temp sensor
Barrow 17w pump (hidden under the metal panel below the reservoir)
Barrow 14mm OD fittings
EK Fill Port
2x DarkSide 3\8 Flex Tubing Compression Fittings (used to connect the fill port to the reservoir)
5x DarkSide 1/4 plugs
14mm OD PETG tubing
Misc DarkSide extenders and adapters (mostly hidden and used for plumbing the water pump to pass though ports)
1x DarkSide 3way splitter
Mayhems UV Green Pastel Fluid
5 Inch 800x540 LCD screen for statistics
Comment