I introduce to you, Heavy Notch a Luxe 2 build
Naming cause...
1) It's heavy as hell
2) I had to notch so many mounting holes to allow fitment of fans, pumps, rads and fittings
This is basically the third case within just over a year and I think I'm finally happy with temperatures and noise levels Probably won't see me post any builds for a good few years. LOL
Parts
9900k @5.2 (-1avx, core cache 49) with a vcore ~ @1.337v (8h+, occt avx2 stable)
Asus Maximus XI Hero Z390 *no issues or concerns with the vrm
Asus Dual RTX 2080 TI (Galax bios) Core 2185 MHz and 2000 MHz.
Trident Z 3600C16 DDR4 @4000Mhz 16-17-17-36 2T @1.41v
Samsung Evo 970 1TB
Hitachi TravelStar 1TB
Corsair RM850x
Corsair ML120
Corsair SP 120
Cablemods custom
Cooling Setup
EKWB D5 Pump Res Combo
EKWB D5 XTop Combo
EKWB Velocity CPU and GPU blocks
Barrow Fittings
12'/10' Glass tubing
Hardware Labs Nemesis 480GTS x2, 360GTS, EKWB XE360
MISC Darkside UV and RGB strips, misc fan hubs and some tessa tape for wires (why not?)
(I think that's literally everything)
Writeups (for those interested in direct die and or lapping results)
https://forum.dazmode.com/forum/hear...nd-after-9900k
https://forum.dazmode.com/forum/hear...uper-long-read
Thoughts and reflections
The luxe 2 chassis is pretty flimsy, the cage flex is pretty noticable, even with rads installed, the structure still allows quite a bit of flex. The back panel flexes with ease and can be subjected to easy warping.
1/2 of the base fan cut outs along with the bracket is not optimal for airflow.
The lack of gpu mount support for the cut outs is pretty dangerous, and the only real option would be to support it with hard tubing lines or one would need to fabricate some sort of brace
Cable management in this case is difficult and a disaster to work with, no real room to run wires at the top of the chassis, side channels don't offer much space either. (comparing this with the view and R6)
Unfortunate that 4 120s can not be utilized behind the front cover due to the front io placement
Unfortunate that fan placement at the top can not be utilized due to the design of the top cover. (perhaps slim fans may work, didn't have any on hand)
Curved bottom edge on the back side requires caution if transporting (don't bother to pick it up from the base, it'll slip)
Naming cause...
1) It's heavy as hell
2) I had to notch so many mounting holes to allow fitment of fans, pumps, rads and fittings
This is basically the third case within just over a year and I think I'm finally happy with temperatures and noise levels Probably won't see me post any builds for a good few years. LOL
Parts
9900k @5.2 (-1avx, core cache 49) with a vcore ~ @1.337v (8h+, occt avx2 stable)
Asus Maximus XI Hero Z390 *no issues or concerns with the vrm
Asus Dual RTX 2080 TI (Galax bios) Core 2185 MHz and 2000 MHz.
Trident Z 3600C16 DDR4 @4000Mhz 16-17-17-36 2T @1.41v
Samsung Evo 970 1TB
Hitachi TravelStar 1TB
Corsair RM850x
Corsair ML120
Corsair SP 120
Cablemods custom
Cooling Setup
EKWB D5 Pump Res Combo
EKWB D5 XTop Combo
EKWB Velocity CPU and GPU blocks
Barrow Fittings
12'/10' Glass tubing
Hardware Labs Nemesis 480GTS x2, 360GTS, EKWB XE360
MISC Darkside UV and RGB strips, misc fan hubs and some tessa tape for wires (why not?)
(I think that's literally everything)
Writeups (for those interested in direct die and or lapping results)
https://forum.dazmode.com/forum/hear...nd-after-9900k
https://forum.dazmode.com/forum/hear...uper-long-read
Thoughts and reflections
The luxe 2 chassis is pretty flimsy, the cage flex is pretty noticable, even with rads installed, the structure still allows quite a bit of flex. The back panel flexes with ease and can be subjected to easy warping.
1/2 of the base fan cut outs along with the bracket is not optimal for airflow.
The lack of gpu mount support for the cut outs is pretty dangerous, and the only real option would be to support it with hard tubing lines or one would need to fabricate some sort of brace
Cable management in this case is difficult and a disaster to work with, no real room to run wires at the top of the chassis, side channels don't offer much space either. (comparing this with the view and R6)
Unfortunate that 4 120s can not be utilized behind the front cover due to the front io placement
Unfortunate that fan placement at the top can not be utilized due to the design of the top cover. (perhaps slim fans may work, didn't have any on hand)
Curved bottom edge on the back side requires caution if transporting (don't bother to pick it up from the base, it'll slip)
Comment