Tweet
2 pumps Laing D5 Vario : 75$ each
- one from koolance : PMP450 : wires are sleeved white , stock compression ring and mounting system
- one from dazmode : wires are not sleeved , stock compression ring and mounting system
The power is given via a molex plug, and the tach information from a fan plug.
So you can power the pumps from the PSU, and connect them to your motherboard for monitoring.
you can activate in your bios the feature to make an alarm noise when fan fails, so the PC will let you know if a pump fails.
One D5 mod kit , Barrow , alluminium blue : 20$
no scratches
the ring is threaded like the stock compression ring from laing
It will fit the stock mounting system, and most aftermarker mounting systems and dual tops (but not the bitspower dual top)
Two bitspower D5/MCP655 mod kit
id didn't bought them at the same time and the blue color is slightly different.
- the first one only contains the alluminium parts and has a few scraches :20$
- the other one is completely new and comes with the box and complete bundle : Support, anti vibration silicon pad, main ring, black parts , 4-PIN male extract tool : 40$
it's this one : https://www.dazmode.com/store/produc...abrasive_blue/
one bitspower Dual D5 Mod TOP, acrylic : 100$
its's this kit : https://www.dazmode.com/store/produc...ylic_version_/
complete bundle with box, well almost :
contains the Dual top + 2x blue o-rings + 2 acrylic blue stop fittings + base acrylic 8mm + base acrylic 6mm
I don't know what the base acrylic 6/8mm are used for, but if you need to mount them, the screws are not included. those a 3x M4x16mm screws , easy to find if you need them.
Disclaimer : it WON'T work with the stock compression rings.
you have to use the compression rings from bitspower (D5/MCP655 mod kit)
the very ones i sell also.
Believe me I tried to use the stock compression rings, as well as the barrow compression ring, the threading is different.
I can make a bundle of everything for 250$
I accept crypto currencies as a mean of payment (ethereum, monero, bitcoin)
- one from koolance : PMP450 : wires are sleeved white , stock compression ring and mounting system
- one from dazmode : wires are not sleeved , stock compression ring and mounting system
The power is given via a molex plug, and the tach information from a fan plug.
So you can power the pumps from the PSU, and connect them to your motherboard for monitoring.
you can activate in your bios the feature to make an alarm noise when fan fails, so the PC will let you know if a pump fails.
One D5 mod kit , Barrow , alluminium blue : 20$
no scratches
the ring is threaded like the stock compression ring from laing
It will fit the stock mounting system, and most aftermarker mounting systems and dual tops (but not the bitspower dual top)
Two bitspower D5/MCP655 mod kit
id didn't bought them at the same time and the blue color is slightly different.
- the first one only contains the alluminium parts and has a few scraches :20$
- the other one is completely new and comes with the box and complete bundle : Support, anti vibration silicon pad, main ring, black parts , 4-PIN male extract tool : 40$
it's this one : https://www.dazmode.com/store/produc...abrasive_blue/
one bitspower Dual D5 Mod TOP, acrylic : 100$
its's this kit : https://www.dazmode.com/store/produc...ylic_version_/
complete bundle with box, well almost :
contains the Dual top + 2x blue o-rings + 2 acrylic blue stop fittings + base acrylic 8mm + base acrylic 6mm
I don't know what the base acrylic 6/8mm are used for, but if you need to mount them, the screws are not included. those a 3x M4x16mm screws , easy to find if you need them.
Disclaimer : it WON'T work with the stock compression rings.
you have to use the compression rings from bitspower (D5/MCP655 mod kit)
the very ones i sell also.
Believe me I tried to use the stock compression rings, as well as the barrow compression ring, the threading is different.
I can make a bundle of everything for 250$
I accept crypto currencies as a mean of payment (ethereum, monero, bitcoin)
Comment