Announcement

Collapse
No announcement yet.

A la recherche d'une pieces

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • A la recherche d'une pieces

    Bonjour

    Je suis a la recherche d'une pieces pour fixer 2 radiateurs face a face.
    Avec 2 fans au centre, style hamburger.
    Voici une capture: Click image for larger version

Name:	image001.jpg
Views:	1
Size:	26.9 KB
ID:	79318

    Avez-vous une solution ?

    @++
    Watercooling power !

  • #2
    Not the best solution, heat from first rad goes into second. Better off with single thick rad in push-pull or find some way to mount second rad in a different spot. Bon Chance !
    3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

    Comment


    • #3
      Gdesmo a raison , ce n'est pas la meilleur solution a ton probleme. Tu va etre mieux acheter un radiateur plus épais. (La serie RX d'xspc suffit)
      Parcontre Daz porte la 'bracket' que tu recherche si tu veux vraiment utilisé la methode en haut.

      Lien:
      http://www.dazmode.com/store/product...metal_radbox_/
      Nova Stryker / Asus Z77 Sabertooth | Intel 3770K | Corsair Vengeance 1600mhz 32Gb | Crucial M5 240Gb | WD Black | Asus R9 390 Strix | CM Storm Stryker | BP Summit EF
      Nova Polaris / Asus Maximus Gene VIII | Intel 6600K | Corsair Vengeance 3200mhz 16Gb | Intel M2 240Gb | Toshiba 2tb | EVGA GF 1070 | Fractal Node 804 | Swiftech Apogee XL2

      Comment


      • #4
        Ouin !

        Je vais acheter un radiateur plus gros

        @++
        Watercooling power !

        Comment


        • #5
          Sorry but my French is horrible, I gather that you want to use that to mount the rad externally. If so, the fan should be mounted directly on the rad. Case then bracket then rad and fan on the rad in pull configuration. RX series rad is great, but use a medium speed fan that can undervolt so that you can drop noise level and still get good air flow. It looks like it was a busy day on the forum, doesn't anyone work out there ? cheers
          3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

          Comment


          • #6
            For mounting a rad externally, check out this option: http://www.dazmode.com/store/product...quick-release/

            I got one myself and it's built very well. I'm going to use it to mount a 360 rad off the back of my case. Sorry for not speaking French, but mine is horrible too!
            Mario

            RIG 1: MSI P55-GD65 mobo | CORE i7 870 | 16GB RAM | OCZ 240GB SSD | WD 1TB HD | CORSAIR H70 | 2x EVGA GTX 560Ti 448 FTW SLI | EK FULL GPU WATER BLOCKS | XSPC DUAL BAYRES WITH D5 VARIO PUMP | XFX PRO1050 BLACK EDITION PSU | HAF 932

            RIG 2: EVGA P55 V mobo | CORE i5 760 | 8GB RAM | WD 500GB HD | CORSAIR H60 | 2x EVGA GTX 460 FTW SLI | EK FULL GPU WATER BLOCKS | DDC PUMP WITH XSPC ACRYLIC RES TOP | CORSAIR HX 850 PSU | HAF 912

            Comment


            • #7
              Originally posted by gdesmo View Post
              Sorry but my French is horrible, I gather that you want to use that to mount the rad externally. If so, the fan should be mounted directly on the rad. Case then bracket then rad and fan on the rad in pull configuration. RX series rad is great, but use a medium speed fan that can undervolt so that you can drop noise level and still get good air flow. It looks like it was a busy day on the forum, doesn't anyone work out there ? cheers
              i'm the lone French translator - And I've got stuff to do!

              Essentially what he wants to do is a rad sandwhich.
              Nova Stryker / Asus Z77 Sabertooth | Intel 3770K | Corsair Vengeance 1600mhz 32Gb | Crucial M5 240Gb | WD Black | Asus R9 390 Strix | CM Storm Stryker | BP Summit EF
              Nova Polaris / Asus Maximus Gene VIII | Intel 6600K | Corsair Vengeance 3200mhz 16Gb | Intel M2 240Gb | Toshiba 2tb | EVGA GF 1070 | Fractal Node 804 | Swiftech Apogee XL2

              Comment


              • #8
                He might be better off just going push-pull on a good rad.
                3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

                Comment


                • #9
                  Didn't Daz do a rad sandwich on his Sniper build?
                  Mario

                  RIG 1: MSI P55-GD65 mobo | CORE i7 870 | 16GB RAM | OCZ 240GB SSD | WD 1TB HD | CORSAIR H70 | 2x EVGA GTX 560Ti 448 FTW SLI | EK FULL GPU WATER BLOCKS | XSPC DUAL BAYRES WITH D5 VARIO PUMP | XFX PRO1050 BLACK EDITION PSU | HAF 932

                  RIG 2: EVGA P55 V mobo | CORE i5 760 | 8GB RAM | WD 500GB HD | CORSAIR H60 | 2x EVGA GTX 460 FTW SLI | EK FULL GPU WATER BLOCKS | DDC PUMP WITH XSPC ACRYLIC RES TOP | CORSAIR HX 850 PSU | HAF 912

                  Comment


                  • #10
                    Unless you have a crazy amount of air going through the rads it does not work too well. Think about fan pulling hot air out of one rad and using that same air to try and cool the next rad. If you were to go fan-rad-fan-rad-fan it could work but you are still better off going with two rads separated so that each rad gets cooler air circulating through it. Click image for larger version

Name:	images (5).jpg
Views:	2
Size:	8.4 KB
ID:	75177
                    3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

                    Comment


                    • #11
                      c'est pas la meilleur ides de faire ceci, car essentiel ment quand l'air passe dans les radiateur il en extrait la chaleur et l'air sort de l’environnement que tu veut garder froid. Dans le contexte ou tu insert 2 radiateur l'un après l'autre dans le même conduit d'air, le premier va avoir un plein capaciter (proportionnellement a vos fan et température de la pièce) mais le deuxième lui est bombarder avec l'air chaud de le premier, ceci peut causer le deuxième radiateur de faire peut de différence ou même en faire une qui est négative(un radiateur a un concept de basse qui est semblable a un bloc de processeur ou de carte video mais qui est utiliser en l’envers grace a l'environnement ou il est utiliser) alors si tu passe de l'air qui est plus chaud que l'eau sa pourrais absorber la chaleur en place de en dissiper.
                      Orange GT Build
                      Orange V8 GT Build
                      Ice Phoenix Build

                      Comment


                      • #12
                        A la recherche d'une seconde pieces

                        Voici l'image:
                        Click image for larger version

Name:	db_file_img_4976_800xauto.jpg
Views:	1
Size:	61.9 KB
ID:	75419

                        Je recherche le contour en caoutchouc.
                        Protéger le contour coupant.

                        Il était disponible la semaine passé a 100$ et depuit la mise a jour, ce matériel n'est plus.

                        @++
                        Watercooling power !

                        Comment


                        • #13
                          Le contour coupant de ???
                          Des trous pour passer les fils?
                          De la plaque de la MOBO?
                          sigpic
                          CPU:AMD 8350
                          MB: Asus Crosshair Formula-Z
                          GPU:dual X-Fire AMD R9 290
                          HDD: 3 for total 1800GB
                          Monitor: 24" Phillips 144hz
                          Case:Haf-X EATX
                          PSU:Seasonic 1050W Gold
                          8Gigs G-Skill ddr3 1600Mhz CasL-9
                          Darkside triple rad kit+XSPC Razor GPU block.
                          Color scheme:RED,RED and RED

                          Comment

                          Working...
                          X