Hooded's - Phanteks Enthoo Pro

[Hooded]

Well bro's I'm gonna try to do a bit of a log build for this one. Definitely not gonna take as long as the Stryker Build which is still on going and going LOL

So I've already got all the stuff for this build. I'm moving my X58 system out of my Blue Dragon case into my new Phanteks Enthoo Pro case. I'll be making a few changes along the way of coarse. I managed to find a good buy on a reference 6970 ($100), so now I'm able to use that paper weight I got as a proper block. Stepping up to a Crossfire system.

I've made a few other changes for the build as well but will hit on them as the log progresses.

So I took a couple shots of the new DDC pump res heatsink mount I got ready to go in the case. Dropping the XSPC bay res setup.


Parts List

• Laing DDC 3.25 18W Pump w/ TACH
• Bitspower Dual / Single DDC Top Upgrade Kit 150
• Bitspower Water Tank Z-CAP II - Three Port End Cap Plexi
• Bitspower DDC TOP Acrylic Version
• Bitspower G¼" Silver Shining Aqua-Pipe I Fitting
• Bitspower G¼" Silver Shining In-Side 90 Degree Diversion Fitting
• EK-DDC Heatsink Housing
• EK-UNI Holder DDC V2

[DazMode]

Bp combo always look sick. Did you polish DDC top or does it come clear?

[Hooded]

It comes nice and clear. However the adapter plate to mount res and the top acrylic cap both could use a little polishing. they have some frosty finish on side with threads.

[gdesmo]

Excellent ! Look forward to this log for sure.

[Bartacus]

In! Good looking mount you have there.

[snef]

Nice, love these res

If you polish res top and mounting cap., give a little shot to pump top, it give a very nice wet look

[Hanoverfist]

Nice photo's.. I'm Watching..

[Father Fuzzy]

very nice

thats a sweet setup

[Hooded]

Well looks like the pump mount needs a little modding to allow my pump top and tube res to clear my GPU's
Need to move 5mm towards the drive bays. I will move it 8mm as much as possible.

Ah well next up is the top rad with fans all sleeved up and ready togo.




Koolance Radiator, 3x120mm 30-FPI Copper
Gentle Typhoon D1225C Series - D1225C12B6AZ-00 - 2150rpm

Out with the stock 140mm rear and 200mm front fans. In with 3 - 140mm 92 CFM Scythe - Kaze Maru. 2 will be used as front intakes, and rear fan will also be used as an intake.

Scythe - Kaze Maru-2 140mm

[DazMode]

I used that Mary 2 fan before. Great idea about allowing bigger fan on 120mm mount.

[gdesmo]

Cool ! Drag about having to move things just for 5mm.

[bungwirez]

nice stuff Hooded. liking the custom wiring job.

[Hooded]

Thanks Bungz
I'm trying to keep cables to a minimum. I stole the daisy chain idea from Feser LOL

[nass]

don't use that one tube we bent at the lan

[bungwirez]

Ya! that one was pretty shameful... GD's got a pic somewhere of its crappiness, I'm sure.