Ryze Above

[Gutternutz]

This build will be utilizing AMD's newest AM4 platform & X370 chipset.
So far I have an InWin303 for my chassis and 7 Deepcool TF 120's for cooling.

LC Parts List:
*Daz Soft tube "Flex Kit" LP360*
-Laing DDC 3.2 PWM
-7x ! Hard Tube Straight Fitting 10/12mm - Black
-3x ! Hard Tube 90-Degree Rotary Fitting 10/12mm
-1x Rotary T-fitting 3-way Splitter -Black
-1x 14mm Rotary Spacer Adapter - Male-Male G1/4 - Black
-1x Ball Shutoff Mini-Valve - Matt Black
-4x Bitspower Pass-Through G1/4 - Black
-1x None Chamfer PETG Link Tube OD 12mm - Length 1000mm

Hardware:
-Gigabyte Gaming K7
-AMD 1700
-Gskill Trident Z 2x8GB DDR4 3200 14-14-14-34
-Seasonic Prime Platinum 750watt

[EZ's PC's]

Ohhhhhh ryzen builds startin to come thru. Awesome man cant wait to see more!!

[Gutternutz]

Alright! Got a 1700, Gigabyte Gaming K7, and Trident Z 3200 CL14 (25600) on the way!!!!! So stoked!!!!! =D

[Bartacus]

Alright! Got a 1700, Gigabyte Gaming K7, and Trident Z 3200 CL14 (25600) on the way!!!!! So stoked!!!!! =D

Did you get all that in one place?

[Gutternutz]

Did you get all that in one place?

Yupp. A friend of mine owns a PC shop in Oakville (my home town). I haven't got any concrete prices on the hardware but was assured that it would be cheaper than anywhere else, so I trust him to swing me a deal.

[Necrodead]

Nice, can't wait to see!

[Bartacus]

Awesome timings on that ram! Should be sweet for getting the memory clocked nice and high, assuming the board plays nice.

[Gutternutz]

Awesome timings on that ram! Should be sweet for getting the memory clocked nice and high, assuming the board plays nice.

From what I have seen from reviews over at Newegg most had no trouble at all... just have to manually input the timings and volatage.

[Gutternutz]

Yupp. A friend of mine owns a PC shop in Oakville (my home town). I haven't got any concrete prices on the hardware but was assured that it would be cheaper than anywhere else, so I trust him to swing me a deal.

Well, everything was on back order... so being impatient as I am, I paid premium and ordered from Newegg... not sure when to expect this stuff but anxious non the less. I held off on the cpu until I see further results from the 1600X.

[Gutternutz]

All Here!! =D

[nass]

would use the 3.1 pump instead of 3.2 less vibration noise and still lots of power.

[Gutternutz]

would use the 3.1 pump instead of 3.2 less vibration noise and still lots of power.

Thanks for the tip, only problem is Daz's kit comes with the 3.25 or 3.2 PWM

[nass]

Pretty sure it is the drop down choice thing if not a note would work with your order , have a few 3.2 here yet will buy another 3.1 even though have 3 or more 3.2

[Gutternutz]

Oh life... if it isn't one thing it's another... truth be told, I can't afford to finish this rig like I wanted to right now. Maybe some time in the future I will get to watercool this thing, but as for now it's just a dream.

[nass]

Do things slowly gutter