If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Killer work Hooded!! with the way your tubes and fittings line (and laid out) makes them all look like custom, one-off pieces. I'm like bungz, at the stage you're at I would have to fill it up!
Mario
RIG 1: MSI P55-GD65 mobo | CORE i7 870 | 16GB RAM | OCZ 240GB SSD | WD 1TB HD | CORSAIR H70 | 2x EVGA GTX 560Ti 448 FTW SLI | EK FULL GPU WATER BLOCKS | XSPC DUAL BAYRES WITH D5 VARIO PUMP | XFX PRO1050 BLACK EDITION PSU | HAF 932
RIG 2: EVGA P55 V mobo | CORE i5 760 | 8GB RAM | WD 500GB HD | CORSAIR H60 | 2x EVGA GTX 460 FTW SLI | EK FULL GPU WATER BLOCKS | DDC PUMP WITH XSPC ACRYLIC RES TOP | CORSAIR HX 850 PSU | HAF 912
I'd like you be prepared that filling may be a bitch. Many connections create great deal of resistance with multiple air pocket which compress and take all pump power away, so you may experience difficulty to break trough it.
__________________________________________________ Retro Build: Build Log, Baby Blue Build: Build Log, Green Lanten Build: Build Log, Sentinel Build: Build Log, Venom Build: Build Log, Silent Sniper Build: Final Video, Orange Build: Final Video HTPC Build: Final Video
__________________________________________________
I'd like you be prepared that filling may be a bitch. Many connections create great deal of resistance with multiple air pocket which compress and take all pump power away, so you may experience difficulty to break trough it.
Especially with your fill port at the bottom. I'd turn it upside down to fill it it will make your life easier to use gravity rather than work against it.
Really is beautiful work!
P.S. if you have a connection that you can loosen off near the fill port so that air can escape it will also help.
Filled.
I filled from the bottom up.
- Hooked up a jug of water to my drain at bottom
- Added a piece of hose to fill port on res for a breather at the highest point
Chasing micro air bubbles now haha.
This part will take a while. The case is rocking and a rolling while I chase these little suckers around.
Filled.
I filled from the bottom up.
- Hooked up a jug of water to my drain at bottom
- Added a piece of hose to fill port on res for a breather at the highest point
Chasing micro air bubbles now haha.
This part will take a while. The case is rocking and a rolling while I chase these little suckers around.
Is it singing " Tiny Bubbles " ?
3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu
It is a given for me, I work on a lot of heating loops.
3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu
Comment