hello
I thought i would share the diagram i made for my individually sleeve project for PCI-E ATX molex modular wires on the corair HX850. As per the connector indication, they should be the same for the whole TX/HX series.
Please note these pictures are from a view where the wire enters the connector (See below Picture for reference). The clip of the connector is always upwards from that view.
PSU PCI-E connector (Aka the blue connector), This is the connector that is to be inserted in the Corsair power supply.
PCI-E connector. This is the view of where the wire enters the connector (the connector that will be inserted in the graphic card (video card)
The PCI-E connectors on the power supply as an addition +2 connector. Added to the 6 pin PCI-E connector will achieve an 8 pins PCI-E connector. These will require a wire that is attached to both A and C. C is attached to the connector with 2 rounded corners and A is attached to the connector that is completely square. (See the picture for reference).
hope that helps. if you have any question let me know
I thought i would share the diagram i made for my individually sleeve project for PCI-E ATX molex modular wires on the corair HX850. As per the connector indication, they should be the same for the whole TX/HX series.
Please note these pictures are from a view where the wire enters the connector (See below Picture for reference). The clip of the connector is always upwards from that view.
PSU PCI-E connector (Aka the blue connector), This is the connector that is to be inserted in the Corsair power supply.
PCI-E connector. This is the view of where the wire enters the connector (the connector that will be inserted in the graphic card (video card)
The PCI-E connectors on the power supply as an addition +2 connector. Added to the 6 pin PCI-E connector will achieve an 8 pins PCI-E connector. These will require a wire that is attached to both A and C. C is attached to the connector with 2 rounded corners and A is attached to the connector that is completely square. (See the picture for reference).
hope that helps. if you have any question let me know
Comment