In-case voltage adapter for waterpumps

[jack_l2]

I am trying to find a simple in-case (I dont have any free bays left) voltage adapter (mostly from 6-12 volts) which would connect to a molex plug and can handle 2 amps (or a max of 24 watts).

Most fan controllers are bay-based unfortunately.

[bungwirez]

I use this...

https://www.dazmode.com/store/produc..._version_-_uv/

[jack_l2]

^^ Interesting, but does it adjust voltages or it is set to 5, 7 and 12v?

Also, do they have a limit of power per channel? Did not find all that info under the specs

[bungwirez]

embarrassingly, I'm the son of an electrician... but yet, I've not been able to sort this out.

My use for this product is simple one point Molex power of multiple fans and/or pump.
I've not used the included "regulator" since I prefer a "set it and forget it" methodology.

That's why I'll be using one of these ModMyToys fan splitters in my build
http://www.modmytoys.com/pcb.html

[snef]

i dont know if Daz still have these in stock but this is what you need

http://koolance.com/pump-or-fan-spee...r-ctr-spd1224m

[jack_l2]

Snef : Yes, a bit hefty for $50 though. Almost the price of the pump itself