Announcement

Collapse
No announcement yet.

WC Stuff, Z87 board, Camera lenses, IPS Monitors

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • WC Stuff, Z87 board, Camera lenses, IPS Monitors

    Hi!

    For Sale :

    I accept Paypal and EMT. Shipping is not included and will be done via Canada Post.

    2X EVGA GTX 770 SC with EK Nickel-Plexi waterblock and EK backplate (stock cooler also included) 200$ each SOLD
    The nickel finish has some discoloration but it's only cosmetic and doesn't impact performances.


    EK-FC770 GTX - Nickel Plexi GPU Waterblock 40$ SOLD
    This block has never really been used except during a leak phase. At the time of the leak phase, I discovered that I had cracked the plexi top by mistake so on a rush I ordered another waterblock to replace it and months after that, I ordered a replacement plexi top but I never had to use this block after. So the topis new and it has only seen water to test if everything was leak-free after the top switch. It comes with the thermal pads and they can be re-used since they were used for about a few hours max.


    EK-FC Terminal TRIPLE Parallel - Plexi 30$ (Brand new never used. Still Sealed!!)

    EK-FC Terminal DUAL Parallel 3-Slot - Acetal 20$

    2X XSPC RX480 V2 480mm radiator Black 60$ each or 100$ for both SOLD

    Bitspower D5 Pump Modding Kit - Black Matte 25$ SOLD

    Primochill Rigid Ghost Compression Fitting 3/8" x 1/2" Knurled Anodized Green (16x) 48$ SOLD

    EVGA Z87 Classified Motherboard 195$

    Intel Core i5-3570K Ivy Bridge Quad-Core 3.4GHz LGA 1155 CPU 175$ SOLD

    2X ASUS PA248Q 24.1" 6ms (GTG) IPS Monitor (1920x1200) 300$ each
    If both are taken together, I will include the dual monitor stand they are on now.

    Canon Rebel XSi 12MP with a 18-55mm IS Lens 250$ SOLD

    Canon EF 50mm F/1.8 II Lens 90$ (Barely used)
    Comes with the original box and lens caps.

    Tamron SP AF 90mm F/2.8 Macro 1:1 Lens (Canon Mount) 375$
    Bought used in september 2014. Works perfectly but I moved to Nikon.
    No original box but will be very well protected. Comes with hood and lens caps.

    AppleTV 2. Never been jailbroken (but can be :-)) All original. 150$ SOLD



    Upon request since they are big so shipping will be expensive, I have 3 Case Labs case available. 1 White S8 + Pedestal, 1 White SM8 and 1 Black SMH10. If you have a serious interest in them send me a PM.


















    Thanks and feel free to ask any questions you might have.
    Last edited by Akira749; 06-19-2015, 11:41 AM.
    Luc

    Orchid (Corsair-Crystal-570X)
    Silent Watcher (be quiet! Dark Base Pro 900)
    Eclipse (Parvum L1.0)
    Northern Lights (Phanteks Enthoo Luxe)
    Lady Sif (EK-Vulture)
    Xenomorph (Parvum S2.0)

  • #2
    Wow ! A whole bunch of nice things !
    3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

    Comment


    • #3
      Question (maybe a stupid one)

      Can the fittings be used for flexible pvc tubing as well ?

      Thanks

      Comment


      • #4
        Makes me want to build the wife a proper PC!
        Tie Fighter
        Caselabs Mercury S5, EVGA X99 Micro, 5930K, EVGA GTX 980 SC SLI, AX 1200i, 16GB HyperX Predator DDR4, Samsung 850 Pro 256GB

        Comment


        • #5
          Originally posted by Virgule View Post
          Question (maybe a stupid one)

          Can the fittings be used for flexible pvc tubing as well ?

          Thanks
          Those fittings are made for 1/2 od x 3/8 id flexible tubing.
          3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

          Comment


          • #6
            Originally posted by gdesmo View Post
            Those fittings are made for 1/2 od x 3/8 id flexible tubing.
            Aren't the ghost fittings made for hard tube sir?

            Comment


            • #7
              Originally posted by Bartacus View Post
              Aren't the ghost fittings made for hard tube sir?
              Yea, I think they are. Could they be used to 3/8 1/2 soft tubing ?

              Comment


              • #8
                Originally posted by Virgule View Post
                Question (maybe a stupid one)

                Can the fittings be used for flexible pvc tubing as well ?

                Thanks
                Originally posted by gdesmo View Post
                Those fittings are made for 1/2 od x 3/8 id flexible tubing.
                Originally posted by Bartacus View Post
                Aren't the ghost fittings made for hard tube sir?
                Originally posted by Virgule View Post
                Yea, I think they are. Could they be used to 3/8 1/2 soft tubing ?

                Those Primochill Ghost fitting are made for hard tubing and can't be used with soft ones.
                Luc

                Orchid (Corsair-Crystal-570X)
                Silent Watcher (be quiet! Dark Base Pro 900)
                Eclipse (Parvum L1.0)
                Northern Lights (Phanteks Enthoo Luxe)
                Lady Sif (EK-Vulture)
                Xenomorph (Parvum S2.0)

                Comment


                • #9
                  Originally posted by Akira749 View Post
                  Those Primochill Ghost fitting are made for hard tubing and can't be used with soft ones.
                  Thanks for the info, sorry for derailling.

                  Comment


                  • #10
                    Ooops ! It did say 3/8 x 1/2 in description though.
                    3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

                    Comment


                    • #11
                      Originally posted by gdesmo View Post
                      Ooops ! It did say 3/8 x 1/2 in description though.
                      its ok. I'm buying the lot.

                      maybe 50 feet of this tube in my closet.
                      HAF932 Mods
                      C70 Mods

                      Comment


                      • #12
                        So much great stuff

                        Comment


                        • #13
                          Damn,
                          I was looking to grab that 3570K.

                          Comment


                          • #15
                            will take one of your vids of your hands Akira pm your email will send funds tomorrow disregard my pm
                            Blackout
                            Something-New
                            Sma8-Caselabs

                            Comment

                            Working...
                            X