lr pc

[nass]

Decided to go a different route and built an htpc that fits in the tv stand instead of the caselabs. Bought a fractal design node 605 and slapped the living room pc into it. Dont see any real way to add water cooling to it bought a gelid hsf for it.

http://www.fractal-design.com/home/p...eries/node-605

http://www.gelidsolutions.com/produc...2&cid=12&id=91





If anyone has water cooled one of these am up for suggestions, am thinking external and not really worth it then.

[gdesmo]

Why not an external radbox with a few disconnects.

[nass]

ya have all the disconnects not sure it is really worth it for just the cpu, using onboard vid on this cpu.

[Akira749]

One thing you could do would be to use the 2x80mm on the back.

You would need 2x 80mm fans, 1x Dual 80mm Radiator and 1x tiny tank reservoir with pump mount. This one could fit on the front right of the case since it looks like you have a bit of free space there.

[nass]

They make a dual 80mm rad, u seen them somewhere Akira? I have the res already super small bitspower just need a pump. Dual setup have is too big to use.

[Akira749]

They make a dual 80mm rad, u seen them somewhere Akira? I have the res already super small bitspower just need a pump. Dual setup have is too big to use.

Unless he sold it Lowfat on the HWC forum had a used one for sale. It's not good looking but a rattle can could fix the issue it was like 10$+shipping if I remember.

Or you can check FrozenCPU : 80mm Dual Radiators

[gdesmo]

Yup or a dual 92.

[nass]

Thx Akira will see if lowfat still has that one this os a closd no window system no need for perfect.

Ya G is not allot of room in there, cooling plus dual 80 be hard enough.

[Akira749]

Thx Akira will see if lowfat still has that one this os a closd no window system no need for perfect.

Ya G is not allot of room in there, cooling plus dual 80 be hard enough.

Cool!

[Cyclops]

I've used both dual 80 and dual 92mm rads in the past, to great effect actually. I used Cooler Master Blade Master fans. They make 80 and 92mm versions of them and both are PWM so that's a plus.

[gdesmo]

If you can shoehorn it in go with the 92's since you have a dozen of the fans and grills already.

[DazMode]

I want to make another desktop build for awhile now.

[nass]

ya these things are cool Daz, not really small, is like the size of a big receiver, built in fan controller also card reader, usb and audio in the front behind a drop down door.

Need to get a new power supply all modular to make some more room. Maybe can get the 92's in there G, know they used to make allot of shrouds as 92 were better fans than the 80 stuff.

Pm'ed lowfat haven't heard back yet so figure to order one from f-cpu this weekend, something new to play with. Took about 4 hours to build it. Is pretty quiet now as the gelid is silent, but can still hear it and temps are little high compared to the 350d it was in prior to the move. Wanna use some of the used stuff I grabbed, is allot of water cooling parts there sitting.

[nass]

well went to grab a new power supply and ended up with an asus z97i-plus mini-itx motherboard and evga 650 gi modular power supply. Have a 4770k laying around here that can use on this system. Board will give more room for watercooling plus the modular power supply as previous one wasn't.

[Akira749]

well went to grab a new power supply and ended up with an asus z97i-plus mini-itx motherboard and evga 650 gi modular power supply. Have a 4770k laying around here that can use on this system. Board will give more room for watercooling plus the modular power supply as previous one wasn't.

Sweet!!!