Recently my DDC 3.25 bit the dust after nearly 3 years of loyal service. I was going to just replace it and move on, but after spending any amount of time at dazmode.com my cart gets full so I am going to do a full build log again (lots of stuff has changed).
Log:
Board:MSI z77 Mpower
CPU: Intell 3770k @ 4.8 Ghz delidded
GPU: EVGA GTX 980
Memory: 12 GB Corsair Dominator DDR3 (2x4 and 2x2 in dual channel)
2 vertex 3 120 GB SSD, 2 Samsung 840 120 GB SSD and WD Blue 1TB HDD
Asus Xonar DX 7.1 sound card
Case : Corsair Air 540
PSU: XFX fully modular 850 watt gold rated
Cooling:
Ek PE 360 radiator
Xspc 240 radiator
Ek dazmode maple leaf edition cpu block
Ek gtx980 block and backplate
Bitspower dominator 4 dimm memory block blue
3x koolance 2650rpm 120mm fans
2x Xspc 120mm fans
Gvans 4 30w channel controller
Ek white acetal csq d5 pump top
Darkside 6 port tube reservoir
White 3/8 5/8 tube
Darkside 14cm led strips 1 orange 1 white
D5 pump
Orings and general maintenance stuff
Current colour scheme is blue but in February I plan on making the jump to skylake and will be sticking with MSI for the motherboard. Of course it seems this time around its either red or white so I will go with white at that point so I'm going to be moving my loop over to a blue and white theme under the current build.
Will update with images as things progress.
Current reservoir and pump are just placeholders but will actually be separate and moved over when I get new parts in.
Log:
Board:MSI z77 Mpower
CPU: Intell 3770k @ 4.8 Ghz delidded
GPU: EVGA GTX 980
Memory: 12 GB Corsair Dominator DDR3 (2x4 and 2x2 in dual channel)
2 vertex 3 120 GB SSD, 2 Samsung 840 120 GB SSD and WD Blue 1TB HDD
Asus Xonar DX 7.1 sound card
Case : Corsair Air 540
PSU: XFX fully modular 850 watt gold rated
Cooling:
Ek PE 360 radiator
Xspc 240 radiator
Ek dazmode maple leaf edition cpu block
Ek gtx980 block and backplate
Bitspower dominator 4 dimm memory block blue
3x koolance 2650rpm 120mm fans
2x Xspc 120mm fans
Gvans 4 30w channel controller
Ek white acetal csq d5 pump top
Darkside 6 port tube reservoir
White 3/8 5/8 tube
Darkside 14cm led strips 1 orange 1 white
D5 pump
Orings and general maintenance stuff
Current colour scheme is blue but in February I plan on making the jump to skylake and will be sticking with MSI for the motherboard. Of course it seems this time around its either red or white so I will go with white at that point so I'm going to be moving my loop over to a blue and white theme under the current build.
Will update with images as things progress.
Current reservoir and pump are just placeholders but will actually be separate and moved over when I get new parts in.
Comment