If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
I7 3930k, Asus Rampage IV Extreme, HD7970 Xfire and CaseLabs M8
I'm pretty impressed by Corsair lately, especially with them getting into the radiator fan section of things...might have to splurge and replace my GT's with the SP version of their fans as well
AsRock Extreme6 Z97, Intel i5 4690K 16 GB Kingston HyperX DDR3, EVGA GTX 1070, ASUS Strix Raid Pro soundcard, Corsair HX850i, 256 GB Crucial MX100 SSD, 500 GB Crucial MX100 (Gaming) SSD, custom water-cooled Corsair Air 540, MSI AG32C LED monitor, Insignia 32 " LED TV, Windows 10 Pro (64 bit)
Can you run load test and see if you have any difference whatsoever with:
Push-Pull
Push
Pull ?
It won't be completely clean test as one raw of disabled fans will be adding restriction, so push-pull will ahve unfair advantage, but nevertheless it can be interesting info.
__________________________________________________ Retro Build: Build Log, Baby Blue Build: Build Log, Green Lanten Build: Build Log, Sentinel Build: Build Log, Venom Build: Build Log, Silent Sniper Build: Final Video, Orange Build: Final Video HTPC Build: Final Video
__________________________________________________
Yes, waiting for 6 more fan and i will do these test
Now i have one rad with push/pull , and pull on 2 other ex360
And my temp drop around 5c
But....l these fan run at 2300rpm
If i put at 1250 ( same as my previous fan) the drop is only 1 or 2c, i think it will be better with all rad with push and pull fan
But now if i need more air i have it,
at 1250 these fane are quiet like my previous Bitefenix spectre pro but at 2300 to much noise, but its a gaming rig
these fan at 2300 are the loudest fan i ever have, but, i always bought quiet fan before, all fan i bought always 25db or lower
they are my first fan rated at 35db, its hard to me to tell you if they are noisy or not
im a fan of silence and i set all my fan at 70%rpm and its perfect for my for a 24/7 use, not for a HTPC but for a gaming rig its perfect
i connected a temp sensor and set my controller to auto, 70% rpm and if i need more they up to 100% when i use 100% CPU power
but i played BF3 yesterday for more than 3 hours and never going more than 70%
NEW UPDATE!
un autre Update
i do some change to my setup
what i do
add a third HD7970
connected GPU in parallele
redo my pump /reservoir setup
power supply cable sleeving
changed fan for Corsair SP120
and other small little thing
still need to do
waiting and installing missing fan
cable management
make a Raid 0 with bootable drive
and other little thing
what i have with this update
better temps
CPU at stock setting (fan at 70% rpm)
Idle: 27, Full: 53
GPU
Idle:35, Full: 45
better flow rate and yes with a third GPU
before 0.95 GPM
now : 1.3 GPM
im very suprise by the results and the gain
cable sleeving, still need cable management, i waiting for missing fan then i will do my cable management
Holy mackeral look at that systray got any room for window tabs lol
im in eyefinity, 5760 x 1080, i have a lot of space
not a lot
speaker, network, intel rapid storage, action center, asus suite AI, Bluetooth, amd catalyst control center, Microsoft security essential, Steam, core temp, logitech lcd manager, Logitech G serie keyboard, virtual clonedrive,
anydvdHD, epson event manager, safely remove hardware, msi afterburner and msi on screen display
not a lot hahahhahahha
no its for testing, a lot of them are not started like steam, origin, anydvd and others
Betcha this system would do 5,000+ in Heaven 3.0 1920x1080, break P60,000 in Vantage, 10,000 in FurMark. Not to mention 200fps in BF3 5760x1080 maxed out !!!! Rock on dude (hey, what happened to the headbangin' smiley?)
P.S. I'm usually not into the red color scheme, but this is now the sexiest thing next to my wife!!!
Comment