Hi
im on new project,
Snef's "Sand of God"
very hard to find good name lollll
this rig will be my main rig, replacement of extremmmme red demon
start with parts list
Hardware
Cpu: Intel I7 4770k:
Motherboard: Asus Gryphon with Armor kit
Mem: 16 Gb (4x4)Corsair Dominator GT 2133:
GPU: 2 x AMD R9 290x or 2 x gtx780 reference
Case:Caselabs S5 with Pedestal white
PSU: Silverstone ST1200-G with pp05 short cable
SSD: OS: 4 x Samsung 840 pro 128GB and 1 x samsung evo 1TB
Cooling
Fan: 16 x Enermax white
Fan Controller: Aquaero 6
CPU Block: EK Supremacy (CSQ) Plexi Nickel (polish) or clean:
Ram Block: EK Ram CSP plexi nickel (polish) or clean
GPU: 2 x ..........
GPU: Backplate white
Rad: 2 x XSPC RX360 multiport:
Reservoir: EK-Multioption X3 RES 150 with white top and bottom:
Pump: D5 Vario:
Pump top: EK-D5 X-TOP CSQ - WHITE Acetal:
Tubing: E22 10/12mm hard tubing or EK 10/12 hard tubing
Fittings: Bitspower compression fitting, angle and spacer all white,
Coolant: feser clear with dye or mayhem pastel white with dye
Thermal paste: MX-4 and Gelid (EK)
Mod
Sleeving: Darkside White and Yellow sand 2mm, 4mm and sata data Sleeving
Connector: all white connector: [
Paint: whte primer paint and plasti-dip and yellow sand paint
Full custom White and yellow sand Sticker
white and gold screw, and thumb screw:
And more, inspiration
thats it for now, still in planning mode
need to fing how to mix coolant and dye to have the right yellow
thanks
Sponsored by:
im on new project,
Snef's "Sand of God"
very hard to find good name lollll
this rig will be my main rig, replacement of extremmmme red demon
start with parts list
Hardware
Cpu: Intel I7 4770k:
Motherboard: Asus Gryphon with Armor kit
Mem: 16 Gb (4x4)Corsair Dominator GT 2133:
GPU: 2 x AMD R9 290x or 2 x gtx780 reference
Case:Caselabs S5 with Pedestal white
PSU: Silverstone ST1200-G with pp05 short cable
SSD: OS: 4 x Samsung 840 pro 128GB and 1 x samsung evo 1TB
Cooling
Fan: 16 x Enermax white
Fan Controller: Aquaero 6
CPU Block: EK Supremacy (CSQ) Plexi Nickel (polish) or clean:
Ram Block: EK Ram CSP plexi nickel (polish) or clean
GPU: 2 x ..........
GPU: Backplate white
Rad: 2 x XSPC RX360 multiport:
Reservoir: EK-Multioption X3 RES 150 with white top and bottom:
Pump: D5 Vario:
Pump top: EK-D5 X-TOP CSQ - WHITE Acetal:
Tubing: E22 10/12mm hard tubing or EK 10/12 hard tubing
Fittings: Bitspower compression fitting, angle and spacer all white,
Coolant: feser clear with dye or mayhem pastel white with dye
Thermal paste: MX-4 and Gelid (EK)
Mod
Sleeving: Darkside White and Yellow sand 2mm, 4mm and sata data Sleeving
Connector: all white connector: [
Paint: whte primer paint and plasti-dip and yellow sand paint
Full custom White and yellow sand Sticker
white and gold screw, and thumb screw:
And more, inspiration
thats it for now, still in planning mode
need to fing how to mix coolant and dye to have the right yellow
thanks
Sponsored by:
Comment