I just installed the darkside flow meter to see if i'm getting enough flow. Its not moving at all. I think there is an air bubble. I tried everything, shaking the case, putting the case upside down. I'm not sure what I can do anymore.
I'm using a swiftech D5 Pump, Darkside Resservoir, Darkside triple radiator, Swiftech CPU block and a Darkside flow sensor.
I'm at loss as to what is wrong with my loop. Did I install the res upside down? Is the D5 housing installed correctly? Appreciate all the help.
I'm thinking of just tearing this apart and getting a crappy H110
My specs are below:
Asrock x99 Taichi
I7 5930K OC @ 4.5 Ghz @ 1.226 V
Idle temps ~ 37C
Temps keep climbing during load, eventually stopping at 70C. 215Watts during load according to Hwinfo
I'm using a swiftech D5 Pump, Darkside Resservoir, Darkside triple radiator, Swiftech CPU block and a Darkside flow sensor.
I'm at loss as to what is wrong with my loop. Did I install the res upside down? Is the D5 housing installed correctly? Appreciate all the help.
I'm thinking of just tearing this apart and getting a crappy H110
My specs are below:
Asrock x99 Taichi
I7 5930K OC @ 4.5 Ghz @ 1.226 V
Idle temps ~ 37C
Temps keep climbing during load, eventually stopping at 70C. 215Watts during load according to Hwinfo
Comment