Announcement

Collapse
No announcement yet.

need suggestions for some parts from Daz, pump and rad

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #1

    need suggestions for some parts from Daz, pump and rad

    Which dcc pump should I get guys, for this htpc , quiet in mind idea, going to put it on this bitspower res, the small one pictured below.
    Also is there anything else I would need to mount the two? Thinking the 33mm x120 rad also. Dual 80 will order from F-CPU.



    Blackout
    Something-New
    Sma8-Caselabs
    Tags: None
  • #2
    I would use the quiet 3.1 version that Daz has in that case.
    3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

    Comment

    • #3
      Screws that mount the pump when ya buy it will work on this res idea or is that something I need to get also?
      Blackout
      Something-New
      Sma8-Caselabs

      Comment

      • #4
        Would imagine it is the same 4mm x 0.7mm pitch thread but double check they didn't slip 8/32 threads there. will check a couple of my pump tops to see if they are all 4mm.
        3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

        Comment

        • #5
          PWM is also an option.
          __________________________________________________
          Retro Build: Build Log,
          Baby Blue Build: Build Log,
          Green Lanten Build: Build Log,
          Sentinel Build: Build Log,
          Venom Build: Build Log,
          Silent Sniper Build: Final Video,
          Orange Build: Final Video
          HTPC Build: Final Video
          __________________________________________________

          Comment

          • #6
            nass, I checked two other tops with the stock 4mm screws and they fit fine.
            3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

            Comment

            • #7
              Nice thx G
              Blackout
              Something-New
              Sma8-Caselabs

              Comment

              • #8
                I always get the 3.25 pumps and then just run them off fan controller. Totally silent
                Blue Dragon CM690 II an i7 - 960 x58 build
                OverKill HTPC - Red Team Build an AMD FX6100 with dual HD 5870's in crossfire.
                Canadian Amateur Modding Competition

                Comment

                • #9
                  Do you use a pump cooler Hooded ? But yes, fan controller is a bonus.
                  3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

                  Comment

                  • #10
                    On 2 of my currently running DDC pumps I have some GPU ram heatsinks stuck on the stock pump base.

                    My new build (Phanteks Enthoo Pro) however is using a BitsPower Top an EK heatsink kit with vibration mounts. Will be run from a 30 watt fan controller
                    Blue Dragon CM690 II an i7 - 960 x58 build
                    OverKill HTPC - Red Team Build an AMD FX6100 with dual HD 5870's in crossfire.
                    Canadian Amateur Modding Competition

                    Comment

                    • #11
                      Cool ! Did you see the Bitspower pamphlet for the 3.25 I posted ?
                      3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

                      Comment

                      • #12
                        I did but I didn't see enough of it to why there was two screw lengths though.
                        Blue Dragon CM690 II an i7 - 960 x58 build
                        OverKill HTPC - Red Team Build an AMD FX6100 with dual HD 5870's in crossfire.
                        Canadian Amateur Modding Competition

                        Comment

                        • #13
                          I think they are for mounting a stand or bracket but seem long, was actually being a jerk and pointing out that they actually call it a cooler. Need more coffee in me ! Cheers.
                          3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

                          Comment

                          • #14
                            Ah ! Shorter ones are for mounting on the stock tops which have a raised portion for the threads. Glad you mentioned that because nass may need 4-5mm longer screws for the top.
                            3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu

                            Comment

                            • #15
                              ordered a bitspower top with the pump in case stuff don't work out, got the dcc 3.25 with pwm will attach it to the case controller, is no room for aftermarket in here. Ordered a single 33mm rad and clear/uv tubing 10 ft, plus a bottle of ice dragon.
                              Blackout
                              Something-New
                              Sma8-Caselabs

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X