Announcement
Collapse
No announcement yet.
White Phantom
Collapse
X
-
Also had to cut the top part of my case for the xspc rad, just a little bit( since the xspc rad has the in/out holes on either end, didnt look into this my fault had to change my plans a bit) Next attached the block to the mobo, attached the top rad, put in the mobo, to start fitting in the 120 rad( when i change the fluid i may change the build around and move the 120 rad to the front of the build, also may change my tubing in the future to thicker tubing had some trouble with the tight bends in my case and my limited space ( HAD to cross that tube or order more parts and wait :*( Also here i show the pic of the holes i drilled for the back plate lights!
Comment
-
Started to connect my tubing, and get it all put somewhat together( got a little lazy with the pictures, as i got a little frustrated with the tubing haha and getting it to not kink ! So i ended up needing a few more angled adapters ending up orders the purple braided mobo cables XD, as you see here the build is assembled and ready for filling, the friday I put the loop together after my remaining parts arrived I did my video card early in the morning before class forgot to take pics
This is after the second fill i think
Filled and leak testing
Comment
-
Well, for some tips i would advise you not to do your gpu waterblock at 7 in the morning before class haha, after i had the comp running, ran a simple cinebench to see what the idle 35 degree would change too and BAM 2 seconds and its over 70 degrees! I cancel that immediately, As for this experience apparently i didnt put enough TIM on the gpu and had to drain half the loop take out the card, take it apart and re do the TIM on it ! After the reapplication of the TIM, and re installed the card filled the loop again and ran it! I booted up finally once more to run cinebench and to my amazement couldnt get it over 35 with cinebench XD, so next came CS: GO ( got my card hottest before on air ) cant get my card over 42 degrees , extremely happy ! SOOOOOOOOOOO quiet now too haha unbelievable how loud the reference coolers are on the 7970's
As for the Cpu, i need to learn a bit more before OC anymore im at 4.2 right now just a simple OC with the OC tuner for now till schools done and i can play around more. Final build pics ! and pics of the battle station !
Fit the ssd under the hard drives Velcro-ed it to the bottom
back lights in action
Led bar behind the rez lights up pretty good in the dark
Comment
-
Nice to see complete worklog.
I wonder if White LEDs woudl be looking more interesting in Supremacy to show purple liquid inside.__________________________________________________
Retro Build: Build Log,
Baby Blue Build: Build Log,
Green Lanten Build: Build Log,
Sentinel Build: Build Log,
Venom Build: Build Log,
Silent Sniper Build: Final Video,
Orange Build: Final Video
HTPC Build: Final Video
__________________________________________________
Comment
-
Originally posted by bungwirez View PostLol... good job on the build. really like you monitor/desk setup... bong! lolz.3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu
Comment
-
3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu
Comment
-
Originally posted by gdesmo View Post[ATTACH=CONFIG]1257[/ATTACH][ATTACH=CONFIG]1258[/ATTACH] Evaporative Bong coolers, they actually work extremely well !Mario
RIG 1: MSI P55-GD65 mobo | CORE i7 870 | 16GB RAM | OCZ 240GB SSD | WD 1TB HD | CORSAIR H70 | 2x EVGA GTX 560Ti 448 FTW SLI | EK FULL GPU WATER BLOCKS | XSPC DUAL BAYRES WITH D5 VARIO PUMP | XFX PRO1050 BLACK EDITION PSU | HAF 932
RIG 2: EVGA P55 V mobo | CORE i5 760 | 8GB RAM | WD 500GB HD | CORSAIR H60 | 2x EVGA GTX 460 FTW SLI | EK FULL GPU WATER BLOCKS | DDC PUMP WITH XSPC ACRYLIC RES TOP | CORSAIR HX 850 PSU | HAF 912
Comment
Comment