Looks sick. too bad third picture is little off focus.
Announcement
Collapse
No announcement yet.
I7 3930k, Asus Rampage IV Extreme, HD7970 Xfire and CaseLabs M8
Collapse
X
-
__________________________________________________
Retro Build: Build Log,
Baby Blue Build: Build Log,
Green Lanten Build: Build Log,
Sentinel Build: Build Log,
Venom Build: Build Log,
Silent Sniper Build: Final Video,
Orange Build: Final Video
HTPC Build: Final Video
__________________________________________________
-
thanks
anoher update no lather than Thursday
Originally posted by Father Fuzzy View PostSuch a kick ass rig Snef
I just ordered one of those ram blocks thx for the tips
how were the new gpu blocks to install?
just one thing, EK single slot I/O dont fit with XSPC Razor 7970, you need to keep the original one
Originally posted by Midnightoil View PostLove it!!! One question as I have same board.. Why didn't you use the MB block on north bridge ?? Just curious as I'm debating the issue myself due to video card spacing
and the diference between air and water are very low
if i remember, maybe 3 or 4c
and the space are very limited on chipset under a Crossfire/SLI and i prefer esthetic again a lot of tubing, i think it will be a complete mess with this block installed
and i think my loop have enough restriction,Last edited by snef; 12-31-2012, 10:00 AM.
Comment
-
Nice work snef! Can't wait to see more!Mario
RIG 1: MSI P55-GD65 mobo | CORE i7 870 | 16GB RAM | OCZ 240GB SSD | WD 1TB HD | CORSAIR H70 | 2x EVGA GTX 560Ti 448 FTW SLI | EK FULL GPU WATER BLOCKS | XSPC DUAL BAYRES WITH D5 VARIO PUMP | XFX PRO1050 BLACK EDITION PSU | HAF 932
RIG 2: EVGA P55 V mobo | CORE i5 760 | 8GB RAM | WD 500GB HD | CORSAIR H60 | 2x EVGA GTX 460 FTW SLI | EK FULL GPU WATER BLOCKS | DDC PUMP WITH XSPC ACRYLIC RES TOP | CORSAIR HX 850 PSU | HAF 912
Comment
-
ahhh and by the way
i made a litle test, just to be sure all rumors about passive heatsink on XSPC Razor 7970 are tru or false,
first rumor:VRM Heatsink on Razor is made with acetal.....
please..... do you really think XSPC make a heatsink with Acetal,
second rumor: XSPC razor waterblock VRM cooling is worst than a original air cooler
we will know that with this litle test
before removing my Koolance GPU waterblock with VRM watercooled, i took the temp with both GPU at 99% (furmark use only 99%)
these cards are little Factory OC at 1000Mhz
results:
Koolance
Ambiant:25C
GPU-1: 44C
VRM1: 42C
VRM2: 40C
GPU-2: 43C
VRM1: 43C
VRM2: 41C
now with XSPC water block with Passive heatsink on VRM
XSPC Razor 7970 (New Style)
Ambiant:26C
GPU-1: 47C
VRM1: 46C
VRM2: 44C
GPU-2: 46C
VRM1: 46C
VRM2: 46C
i think the results are really good
only a couple C more without watercolled VRM
the XSPC passive vrm Heat sink do the job very well
and like Daz said , XSPC have one of the best design with new line of waterblock like EK with CSQok ok EK was a Joke
dont be affraid to buy Razor water blockLast edited by snef; 01-01-2013, 06:01 PM.
Comment
-
Nice rig Snef!!!!!! I'm loving that case!Mario
RIG 1: MSI P55-GD65 mobo | CORE i7 870 | 16GB RAM | OCZ 240GB SSD | WD 1TB HD | CORSAIR H70 | 2x EVGA GTX 560Ti 448 FTW SLI | EK FULL GPU WATER BLOCKS | XSPC DUAL BAYRES WITH D5 VARIO PUMP | XFX PRO1050 BLACK EDITION PSU | HAF 932
RIG 2: EVGA P55 V mobo | CORE i5 760 | 8GB RAM | WD 500GB HD | CORSAIR H60 | 2x EVGA GTX 460 FTW SLI | EK FULL GPU WATER BLOCKS | DDC PUMP WITH XSPC ACRYLIC RES TOP | CORSAIR HX 850 PSU | HAF 912
Comment
-
thanks,
happy 2013 to everyone
Originally posted by Father Fuzzy View PostLove your pics Snef
Makes me want to redo mine
ram block looks smexy
did you ever put some 140's in the pedestal?
easy to change pump speed or work on tubing or cabling
and i order a red led fan, i dont like the glowing effect on back of the case
i will order corsair af140
Comment
Comment