so close but so far. the GTX690 is 11inch
Announcement
Collapse
No announcement yet.
Anarchy Prodigy
Collapse
X
-
It is always hard to start something else after such project as this. Great mod!__________________________________________________
Retro Build: Build Log,
Baby Blue Build: Build Log,
Green Lanten Build: Build Log,
Sentinel Build: Build Log,
Venom Build: Build Log,
Silent Sniper Build: Final Video,
Orange Build: Final Video
HTPC Build: Final Video
__________________________________________________
Comment
-
Originally posted by MRDcanadian View Postso close but so far. the GTX690 is 11inch
Originally posted by DazMode View PostIt is always hard to start something else after such project as this. Great mod!
but was one of my favorite builds
I was told I received the first prodigy off the boat from NCIX
Response was great... Bitfenix put it on there facebook page
had over 1100 views in one night on HWC
found the window pic on about 10 forums
Bill Owen told me I made Casemodblog but never happened
Being the first out of the gate watercooling the prodigy
never had anyone else to compare to ,I have viewed alot of buildlogs for the prodigy since
and is a fun case to build in
Is a superfast rig, small footprint and quiet
Can be wireless hub broadcasting as well as receiving
can stream windows desktop to my Ipad and open and close windows using the touch
thought that was fun to try out
my best stable overclock was 4736 ghz
pretty good for m-itx board
and of course the skull looks cool in low light
I have ripped out the watercooling in the case and am changing it over to air cooled now
as I need the 7970 for my Apparition build
Comment
-
I usually dismantle my build in matter of days. have to re-use part or go bankrupt!__________________________________________________
Retro Build: Build Log,
Baby Blue Build: Build Log,
Green Lanten Build: Build Log,
Sentinel Build: Build Log,
Venom Build: Build Log,
Silent Sniper Build: Final Video,
Orange Build: Final Video
HTPC Build: Final Video
__________________________________________________
Comment
-
Originally posted by Father Fuzzy View PostI have ripped out the watercooling in the case and am changing it over to air cooled now
as I need the 7970 for my Apparition buildOriginally posted by DazMode View PostI usually dismantle my build in matter of days. have to re-use part or go bankrupt!
BanKrupt!!!! the build project i have now need to be the last one or.................................i do a new one
thats why i use my used parts,
Father
always hard to dismantle a nice rig like that, but its for our benefit, dont hesitate and go!
Comment
-
Originally posted by Father Fuzzy View Postare you putting dual rads upfront? it'll fit if you put dual on top or slim fans if you front mount
Comment
-
That`s a drag, it may be time to get the Dremel out and play Dr. Frankenstein !3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu
Comment
-
Originally posted by gdesmo View PostThat`s a drag, it may be time to get the Dremel out and play Dr. Frankenstein !
Comment
-
Yeah I saw those fans and they kind of suck, thin blades tend to twist and contort causing poor pressure and flow rates. Some of the 200 rads come with an adaptor plate, you might be way better off with a 120 Yate Loon 20mm thick. It has 40% more flow and about triple the pressure, most 200 rads have a low fin count so the Yate Loon would work pretty well. Sorry for me the Dremel is a stress reliever. lol3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu
Comment
-
Originally posted by Father Fuzzy View PostMrdcanadian I think I read that 200 mm rad will hit the IO on side door panel and that 180mm worked better
I so wanted to try 200 mm when I built it
but the dual 120 worked fine
Originally posted by gdesmo View PostYeah I saw those fans and they kind of suck, thin blades tend to twist and contort causing poor pressure and flow rates. Some of the 200 rads come with an adaptor plate, you might be way better off with a 120 Yate Loon 20mm thick. It has 40% more flow and about triple the pressure, most 200 rads have a low fin count so the Yate Loon would work pretty well. Sorry for me the Dremel is a stress reliever. lol
Comment
-
Anarchy had 2 rads and i was forced to put fans on the outside because of the space limitations
if you put a dual rad on the top of the case you loose the drive bay
rad on rear 120 spot cramps the top area
dual rad on the front and loose the drive bay plus hd bays
I could have had top dual rad in roof and 120 rad on the front of case on bottom but decided I needed access thru the top of case
in order to hook up everything easier
tubing access was needed and with the mobo connections ,usb3 on the side door can be a real challenge to hook up
I did some work on the case last week and was thinking about removing all door connections and putting them on the top of case
originally was going to put a H100 in the top and call it a day with passive graphics
then got carried away with watercooling it
hope this makes sense only 1/2 a coffee in me this morning so far
Comment
Comment