Tweet
Hello all!
Back at it again modding! This will be the build log for my current project, being supported by Nanoxia USA and Watercool!
The theme of the build is a Futuristic Police Call Box from the critically acclaimed series Dr. Who! I chose this theme because the build is a gift for my wife who is a massive Dr. Who fan!
Since last years competition build was stripped down and the case was sold, I had all the components left over for this project! with the exception of a GPU (which I'll be taking one out of Throneroom for)
Components are as follows!: (harvested from my last 2 competition builds, + some competition prizes from this year!)
Motherboard: Asus Z370-i mitx
CPU: Intel 8086k @5.0ghz allcore
RAM: Thermaltake Water Ram RGB 16gb 3200mhz (2x8gb)
GPU: nVidia Titan Xp Collectors Edition
SSD: Samsung 970 Evo 500gb nvme M.2
PSU: TBD! (in the process of searching for a suitable SFX PSU but everywhere is currently sold out of the corsair SF750)
Case: 2x Phanteks Evolv Shift X (merged together and modded)
Cooling and Aesthetic components!:
CPU Block: Heatkiller IV Pro Copper Nickel
GPU Block: Heatkiller IV Pro Copper Nickel (Supplied by Watercool!)
Reservoir: Heatkiller Tube 150 w/ d5
Radiators: EKWB Coolstream SE 280mm x2
Fittings: Nanoxia CF 12mm hard tube fittings (Supplied by Nanoxia!)
Combs: Nanoxia CF Aluminum Cable combs (Supplied by Nanoxia!)
Tubing: Bitspower Crystal Link 12mm clear PETG
Fluid: EKWB Indigo Concentrate
Fans: Corsair ML140 White x6
Thus far I have completed the tear down, paint, and re assembly of one whole case, the motherboard, cpu, block, and gpu bracket are re installed, One front panel is entirely completed, the second I need to get some more acrylic for, but it's 75% finished.
Once I drain the GPU loop in Throneroom, and remove one of the titans, I will be swapping the black nickel block, for the copper nickel block supplied by Watercool! Then there is a whole pile of tubing to run and cables to make etc. !
Stay Tuned!
Photos to come as they upload!
Back at it again modding! This will be the build log for my current project, being supported by Nanoxia USA and Watercool!
The theme of the build is a Futuristic Police Call Box from the critically acclaimed series Dr. Who! I chose this theme because the build is a gift for my wife who is a massive Dr. Who fan!
Since last years competition build was stripped down and the case was sold, I had all the components left over for this project! with the exception of a GPU (which I'll be taking one out of Throneroom for)
Components are as follows!: (harvested from my last 2 competition builds, + some competition prizes from this year!)
Motherboard: Asus Z370-i mitx
CPU: Intel 8086k @5.0ghz allcore
RAM: Thermaltake Water Ram RGB 16gb 3200mhz (2x8gb)
GPU: nVidia Titan Xp Collectors Edition
SSD: Samsung 970 Evo 500gb nvme M.2
PSU: TBD! (in the process of searching for a suitable SFX PSU but everywhere is currently sold out of the corsair SF750)
Case: 2x Phanteks Evolv Shift X (merged together and modded)
Cooling and Aesthetic components!:
CPU Block: Heatkiller IV Pro Copper Nickel
GPU Block: Heatkiller IV Pro Copper Nickel (Supplied by Watercool!)
Reservoir: Heatkiller Tube 150 w/ d5
Radiators: EKWB Coolstream SE 280mm x2
Fittings: Nanoxia CF 12mm hard tube fittings (Supplied by Nanoxia!)
Combs: Nanoxia CF Aluminum Cable combs (Supplied by Nanoxia!)
Tubing: Bitspower Crystal Link 12mm clear PETG
Fluid: EKWB Indigo Concentrate
Fans: Corsair ML140 White x6
Thus far I have completed the tear down, paint, and re assembly of one whole case, the motherboard, cpu, block, and gpu bracket are re installed, One front panel is entirely completed, the second I need to get some more acrylic for, but it's 75% finished.
Once I drain the GPU loop in Throneroom, and remove one of the titans, I will be swapping the black nickel block, for the copper nickel block supplied by Watercool! Then there is a whole pile of tubing to run and cables to make etc. !
Stay Tuned!
Photos to come as they upload!
Comment