Blackout

[EZ's PC's]

Lookin extra stealthy man.

[nass]

Thx EZ,

Have a 512gb sammy 950 pro m.2 so added a 2tb ssd to it today, went with Micron 1100 series. Didn't really wanna add/move a spinning drive into this new system.

[Necrodead]

Shiiit, 2TB SSD? nice man.

[nass]

ya wanted some silent storage so went with the micron

[nass]

Well got me a package today from newegg, the cablemod lighting, not that impressed, does work on the motherboard header but so will any stripe. The rf receiver connected to sata power doesn't work at least so far.

The evga p2 cables however look sweet... since I suck plus have no patience for sleaving bought the premium evga kit in black modmesh, looks sweet. Will need to find my cable combs or get some from Daz on next order. Will install tomorrow and take some pics.

The cablemod led light stripe flickers when the power connector is attached sata-receiver then nothing after that. Not sure what is up yet.

[Necrodead]

Nice, I just got the modmesh cablemod cables for my build. Same reasons.

[nass]

ya ordered the stuff thursday evening for $85 bucks, picked up next day at newegg store in Richmond Hill, was well worth it. Looks like they are renovating the store front there I noticed.

[Necrodead]

dang, I didn't see black as an option on newegg and I paid $99 through cablemod themselves.

[nass]

ya no shipping either

Seems is modflex I bought after all.

[nass]

cleanest exposed power supply connections have ever done

[nass]

Should have polished the block on this vid the machining marks really show up in a photo.

[DazMode]

That LTX block still looks better than a new version IMHO.

[nass]

Ya like that block still Daz

[nass]

Well not happy with a few things in my new build. Cpu temps are higher than I like, have a new cuplex block on the way with vision readout, more tubing, fluid plus a few spacers.
Wanna make changes to the tube routing and also polish the ek vid block. And possibly get that second 420 rad installed I still have.

[wattermain]

Should have polished the block on this vid the machining marks really show up in a photo.

Hey nass. I'm not sure that you can polish acetal. Some people say you can and others say you cannot. There is a good "shining up delrin" thread at the "practicalmachinist.com" forum. When I cut the acetal top on my EK 7870 FC block, it would not polish up. The best I could get after wet sanding with 2000 grit and then polishing compound was a smooth mat black finish. Maybe you could try the backside first to see if it will polish. I like the machining marks on acetal. That block looks perfect.