I dunno... it did though, weird... especially since its same pic on page one.
Announcement
Collapse
No announcement yet.
Project Carbon - A Fast, Silent, Cool and Clean Build. [Started March 12, 2013]
Collapse
X
-
Originally posted by Fiftysixk View PostPS. If anyone has an extra fractal design slotted bay cover, one of mine got slightly melted. Too close to the lamp. dohhh.... Much appreciated if you could send one my way3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu
Comment
-
If you pushing air inside from your front mounted rad, make sure you have good ventilation as you may overheat your components.
I had problems with overheating my RAM in the past with similar setup.__________________________________________________
Retro Build: Build Log,
Baby Blue Build: Build Log,
Green Lanten Build: Build Log,
Sentinel Build: Build Log,
Venom Build: Build Log,
Silent Sniper Build: Final Video,
Orange Build: Final Video
HTPC Build: Final Video
__________________________________________________
Comment
-
Yeah White and black is the color scheme, so the change from red to white on the pump will fit it nicely.
I will definitely monitor in case temps. I think the air flow path is good. It doesn't leave many areas in the case where air can be stagnant. I figure with 4 fans on the front rad, 1 80mm fan in the drive bay, and a 140mm in the floor, I should have a fair bit of positive pressure. My only issue is going to be the rear exhaust fan. I cant fit a standard 25mm one in there. My only option for a rear exhaust is one of those scythe 120mmx12mm fans that don't push a whole lot of air. If all else fails, I can always upgrade those 120mm Helix fans in the top to something that sucks a bit more air out.
Comment
-
Originally posted by Fiftysixk View PostYeah White and black is the color scheme, so the change from red to white on the pump will fit it nicely.
I will definitely monitor in case temps. I think the air flow path is good. It doesn't leave many areas in the case where air can be stagnant. I figure with 4 fans on the front rad, 1 80mm fan in the drive bay, and a 140mm in the floor, I should have a fair bit of positive pressure. My only issue is going to be the rear exhaust fan. I cant fit a standard 25mm one in there. My only option for a rear exhaust is one of those scythe 120mmx12mm fans that don't push a whole lot of air. If all else fails, I can always upgrade those 120mm Helix fans in the top to something that sucks a bit more air out.3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu
Comment
-
Nice work!!Mario
RIG 1: MSI P55-GD65 mobo | CORE i7 870 | 16GB RAM | OCZ 240GB SSD | WD 1TB HD | CORSAIR H70 | 2x EVGA GTX 560Ti 448 FTW SLI | EK FULL GPU WATER BLOCKS | XSPC DUAL BAYRES WITH D5 VARIO PUMP | XFX PRO1050 BLACK EDITION PSU | HAF 932
RIG 2: EVGA P55 V mobo | CORE i5 760 | 8GB RAM | WD 500GB HD | CORSAIR H60 | 2x EVGA GTX 460 FTW SLI | EK FULL GPU WATER BLOCKS | DDC PUMP WITH XSPC ACRYLIC RES TOP | CORSAIR HX 850 PSU | HAF 912
Comment
Comment