Announcement
Collapse
No announcement yet.
case mod
Collapse
X
-
I was thinking to mod old case for while now. Thank you for posting, very interesting.
From practical stand point it is better to get money into newer hardware, from modding fun point of vew -- hardware irrelevant__________________________________________________
Retro Build: Build Log,
Baby Blue Build: Build Log,
Green Lanten Build: Build Log,
Sentinel Build: Build Log,
Venom Build: Build Log,
Silent Sniper Build: Final Video,
Orange Build: Final Video
HTPC Build: Final Video
__________________________________________________
Comment
-
Thats some cool ideas your playing around with there.
So how did you get the cracked paint effect?Blue Dragon CM690 II an i7 - 960 x58 build
OverKill HTPC - Red Team Build an AMD FX6100 with dual HD 5870's in crossfire.
Canadian Amateur Modding Competition
Comment
-
Awesome build dmckoy! I'd love to know how you created that cracked paint effect too!Mario
RIG 1: MSI P55-GD65 mobo | CORE i7 870 | 16GB RAM | OCZ 240GB SSD | WD 1TB HD | CORSAIR H70 | 2x EVGA GTX 560Ti 448 FTW SLI | EK FULL GPU WATER BLOCKS | XSPC DUAL BAYRES WITH D5 VARIO PUMP | XFX PRO1050 BLACK EDITION PSU | HAF 932
RIG 2: EVGA P55 V mobo | CORE i5 760 | 8GB RAM | WD 500GB HD | CORSAIR H60 | 2x EVGA GTX 460 FTW SLI | EK FULL GPU WATER BLOCKS | DDC PUMP WITH XSPC ACRYLIC RES TOP | CORSAIR HX 850 PSU | HAF 912
Comment
-
its my second craked effect case first one was crazy undercoat red with black crack on top and a clear coat.
soon will be the good time of the year to do it again.
it needs a to go below freezing point outside to make it work.
it needs 2 cans of paint rust paint and gravel guard.
sanded case and plastic with 800 grid to remove glossy.
1.light coat of rustguard let it dry durring day above 10c leave can in garage near so it freezes a bit.
i had all my pc parts ready and used my cd bay tabs as test pads.
first thing in the morning if its uder 0c i grap the can of gravel gard and give it a nice coat it will start to react and shrink causing cracks and see the coat under it.let it dry during the day since it whent over freezing point. wait a few days to let rubber dry fully and only then a final coat of clear or black paint .
Comment
-
Me thinks I will have to get that stuff and do a test run on something.Blue Dragon CM690 II an i7 - 960 x58 build
OverKill HTPC - Red Team Build an AMD FX6100 with dual HD 5870's in crossfire.
Canadian Amateur Modding Competition
Comment
-
thanks, its actually front case header cables.
my main objective was to clear the bottom of the case for the res. rad. pump.
will have to find something better then a g41 as mobo as this one wont let me go pass 1158 fsb on a rated 1333 fsb.
my old p43 would do 1600fsb solid but to bad it was ddr2.
Comment
Comment