Tweet
Looks great! Like LTX look, don't see those too often.
-
__________________________________________________
Retro Build: Build Log,
Baby Blue Build: Build Log,
Green Lanten Build: Build Log,
Sentinel Build: Build Log,
Venom Build: Build Log,
Silent Sniper Build: Final Video,
Orange Build: Final Video
HTPC Build: Final Video
__________________________________________________ -
missing top of tread on one port are XSpc comp fitting shorter then other style making it so i cant get to tread ?Comment
-
is that a swift teck block?
Have you tried with a bits power fitting or extension?
I think barb fittings have a longer thread than the compression fittings but not 100% sure of that.Blue Dragon CM690 II an i7 - 960 x58 build
OverKill HTPC - Red Team Build an AMD FX6100 with dual HD 5870's in crossfire.
Canadian Amateur Modding CompetitionComment
-
yeah its a swiftech
havent tryed the fitting.
pictures dosent show if theres more then 3 thread on the fitting.
was tempted to cut it down but it got to be perfectly straight to seal right.
its a liquidation so no rmaComment
-
Daz has some Swiftech 1/2 inch barb fittings in the liquidation section. they have an extra long thread.3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 PsuComment
-
-
the tread is to short from missing the first turnComment
-
decided not to use it, i dint want it to fail and leak righ over my GPU .
so so far thats what iv done sorry for poor pic quality its work in progress
Comment
-
now only got to do side panel cuts .
its very cool cpu load or no load stays at 34c during stress test and gpu idle at 28c and goes up to 32c with stress test
im loving those temps.Comment
-
Lookin good dmckoy
slick ssd mount
Comment
-
yeah looks like the case in the 90's were made with SSD in mindOriginally posted by Father Fuzzy View PostLookin good dmckoy
slick ssd mount
Comment
-
just gaught my 2 90 deg. from EK for straighter tubing so they have longer tread and fits on my NB cooler looks like il need some more 90 to finish it offOriginally posted by dmckoy View Post
Comment
-
Never have too many fittings....thats for sureComment
-
there north bridge on WC loop havent played to much on making the fitting go perfect without curves since next thing on my list is a new mobo gpu cpu and setup will be mooved around gona get some more fitting first week on jan so more changes to come
Comment
-
That's a nice PSU you got, but what a pain the non-modular versions are!Mario
RIG 1: MSI P55-GD65 mobo | CORE i7 870 | 16GB RAM | OCZ 240GB SSD | WD 1TB HD | CORSAIR H70 | 2x EVGA GTX 560Ti 448 FTW SLI | EK FULL GPU WATER BLOCKS | XSPC DUAL BAYRES WITH D5 VARIO PUMP | XFX PRO1050 BLACK EDITION PSU | HAF 932
RIG 2: EVGA P55 V mobo | CORE i5 760 | 8GB RAM | WD 500GB HD | CORSAIR H60 | 2x EVGA GTX 460 FTW SLI | EK FULL GPU WATER BLOCKS | DDC PUMP WITH XSPC ACRYLIC RES TOP | CORSAIR HX 850 PSU | HAF 912
Comment
Comment