Announcement

Collapse
No announcement yet.

Project Bahamut

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Received my stuff this morning. There wasn't much. Just my 6 fans and the tubes but it's enough go on ahead with the switch :-).
    Special thanks to Daz for making this build possible by selling great stuff and thanks for all the help and fast order processing!
    I'm not done yet! Still have to get a bunch of fans and pretty sure I'll need more tubes but one thing at a time! One or 2 months and that beast is complete.... finally. Then I'll be able to have my rest. :-)

    Too bad the new fans and rads are not out yet! Click image for larger version

Name:	20210604_101331.jpg
Views:	17
Size:	100.4 KB
ID:	93810

    Comment


    • Muhahaha! Almost 2000 views!
      Thanks for watching guys!

      Motherboard removed, installed the formula motherboard on the case, installed the cpu on the motherboard, the waterblock on the cpu, the bridge on the waterblock...
      Click image for larger version

Name:	20210605_160936.jpg
Views:	11
Size:	116.4 KB
ID:	93823 Click image for larger version

Name:	20210605_200607.jpg
Views:	11
Size:	68.8 KB
ID:	93824
      Yup! I love it!!

      Click image for larger version

Name:	20210606_185502.jpg
Views:	11
Size:	128.2 KB
ID:	93825
      Stupid logo on the corsair fans.. can't see the logo of my 3d printed covers... only one solution!
      Click image for larger version

Name:	20210606_185454.jpg
Views:	11
Size:	135.6 KB
ID:	93826
      Removed the sticker on the fan. Just a temporary solution until I get the Vardars I'm missing...

      Now time to move with restarting over everything..
      See you all later!!!

      Comment


      • I might not be able to finish it before the end finally... Not looking for sympathy so don't judge me. I just came back yesterday from another hospitalization and things are getting really bad. Next time might be the last one. Even yesterday, I decided to come back home even tho the doc was saying I should stay.. Anyways, time to put the last efforts in the build!

        Click image for larger version

Name:	20210607_091937.jpg
Views:	0
Size:	118.9 KB
ID:	93901
        Back to cable mess with the fans swap!
        yep, I still need the fan covers for the back to protect the cats from getting paws or tail in the blade. Owie!

        Click image for larger version

Name:	20210609_121522.jpg
Views:	0
Size:	132.3 KB
ID:	93902
        Not complete but getting there.. decided to not use the backside fans rgb for easier and faster management...

        Click image for larger version

Name:	20210609_155035.jpg
Views:	0
Size:	111.1 KB
ID:	93903
        Yup. That combo is porn!!!

        Click image for larger version

Name:	20210611_185644.jpg
Views:	0
Size:	131.8 KB
ID:	93904
        First tube run.... FAIL!!!

        Click image for larger version

Name:	20210611_191846.jpg
Views:	0
Size:	126.0 KB
ID:	93905
        FAIL AGAIN!!! I've tried douzen of combinations but I did not like any of them so I ditched the complete set of tubes and started over...

        To be continued...

        Comment


        • Last part of today's update...

          Click image for larger version

Name:	20210613_125131.jpg
Views:	0
Size:	98.7 KB
ID:	93907
          First try with new route failed too... the flow indicator was in the way to install a fitting on top of the reservoir...

          Click image for larger version

Name:	20210616_074602.jpg
Views:	0
Size:	57.4 KB
ID:	93908
          Nope!!! It's not straight! You lie!
          Now the 90 angle adapter fit!


          Click image for larger version

Name:	20210616_150513.jpg
Views:	0
Size:	72.8 KB
ID:	93909
          That's all I've been able to do for now... time to sleep... but before that.....


          Click image for larger version

Name:	20210616_092128.jpg
Views:	0
Size:	58.5 KB
ID:	93910
          Aye captain!! Setting course to the Coolstream Galaxy in the EK AF-Torque Spaceship!!!!

          Ok stop giving drugs to that guy.....

          Night everyone!

          Comment


          • One last thing... if anyone have 14mm acrylic tubes they don't plan on using.... I'm a taker... I have 2 tubes left and seeing how I'm messing my bends lately, I won't make it... Or I'll just order them along the fans I need to get in a couple weeks... if Daz still have enough fans in store at that time... with my luck, they will be completely be out of stock I'm sure...

            Comment

            Working...
            X