Looking great. Eager to see the next updates. Glad everything is now coming together.
Announcement
Collapse
No announcement yet.
Max-Overdrive 2.0
Collapse
X
-
Originally posted by SystemTech View PostLooking great. Eager to see the next updates. Glad everything is now coming together.
I was hoping to slip under the wire tonight to upload the rest of the build photos along with the finals and almost made it even with a lot of problems. Anyway long story short it failed in epic proportions and between that and some other things that have popped up there is no way to finish it now. I had just been adding the final fluid to it when one of the lines blew off and soaked me and every thing else, so there is a good chance the mainboard is toast along with the new video card My apologies but Im at a total loss for words at the moment so Im going to upload what I have on my phone as the rest are on the soaked computer at the moment.
good luck to the rest of you, there are a lot of amazing builds,
the aftermath
pre-aftermath
Only shot of the back when I was building at the moment.
Cheers,
-dave
Comment
-
-
Sorry for not chiming in till now. I was devastated beyond belief and life had blown up right after so its been a bit hectic. TYVM for the support guys, I appreciate it a lot it looks like the video card is probably toast. It took on a bout 1.5L of coolant spraying into it so I'm trying to see if I can find a used one but not holding my breath as my wallet is bare to say the least. I'm still unsure of the fate of the main board, I made sure it was still de-energized and then gave it an alcohol bath and letting it dry for a few days yet. Just to make sure hopefully then Ill be able to put it back together and finish it to how I wanted it, and put my mod back in the reservoir when I get another D5 pump as I cant remember if I mentioned it before but prior to the flood and other chaos, the brand new and never used pump was DOA *Bangs head on desk* lol.
Comment
-
Thanks guys, I will fire up a separate build log and maybe try for BOTM for Dec or Jan maybe, if I can get enough time to finish it and add other things that I wanted but we’re too complicated for this round.
hope everyone has a great weekend
Comment
-
This is a very nice build. I totally digging tube lines design-wise, but unsupported connections are dangerous (which you leaned yourself). It is always better/safer that hard tube is somewhat jammed between two points. For instance, two 90-degree fitting and straight between is the safest way.
For spilling, you have to take apart and dry it off. Most likely it will work just fine. May need (carefully) clean PCI and sata connectors.
Keeping fingers croissed for sucessful finish!
__________________________________________________
Retro Build: Build Log,
Baby Blue Build: Build Log,
Green Lanten Build: Build Log,
Sentinel Build: Build Log,
Venom Build: Build Log,
Silent Sniper Build: Final Video,
Orange Build: Final Video
HTPC Build: Final Video
__________________________________________________
Comment
-
Originally posted by DazMode View PostThis is a very nice build. I totally digging tube lines design-wise, but unsupported connections are dangerous (which you leaned yourself). It is always better/safer that hard tube is somewhat jammed between two points. For instance, two 90-degree fitting and straight between is the safest way.
For spilling, you have to take apart and dry it off. Most likely it will work just fine. May need (carefully) clean PCI and sata connectors.
Keeping fingers croissed for sucessful finish!
Given I have such fantastic luck with electronics and such, generally I can give them an alcohol bath and let it sit for a week or two and 80% of the time I can get it running again. So far like I mentioned the video card is still a no go but going to try it again in a week or so along with the motherboard.
Thanks for the comments and I always appreciate your advice and sharing your knowledge and thank you for running these contests! It was crazy stressful but in a good way, well till the last bit haha.
-dave
Comment
-
I wanted to say that the support I received on here has been amazing throughout the competition and wanted to say thank you all very much. Between here and in DM's up to now is what kept me going and even though I know the below is not eligible, I cleaned up the mess in the case this weekend and changed the fittings while keeping all the tubing and temporarily filled the loop for those that were interested. Ill be draining and working on it as I can, as there is still a lot of work (provided I can get everything running) but will make a new build log at some point when I can get back on it. Until then here is a teaser (without power of course lol till it dries out more) .
This first one was just so show what I was explaining earlier about the tubing being supported.
Interior
most of the bottom 1/4 I was planing on making cover panels for similar to the front right to hide some of the insane amount of wiring and give it a cleaner look. And hopefully down the road I'll get the D5 pump back in so I can get rid of the big black DDC at the bottom of the distro block.
I struggled big time weather to build a PSU shroud and figured there was not going to be enough time so I had tried to make the wires as clean as possible and sleeved them in place pretty much one at a time lol. There was approx about 30 or so hours of just sleeving and making all the wires up, trying to carefully measure each one. There are a few I want to redo though
Cheers !
- Likes 1
Comment
-
Originally posted by bms97 View PostGlad to see you back at it so quick!
Comment
Comment