Tweet
Very nicely done nass.
Loving your tube runs as well.
Loving your tube runs as well.
-
Blue Dragon CM690 II an i7 - 960 x58 build
OverKill HTPC - Red Team Build an AMD FX6100 with dual HD 5870's in crossfire.
Canadian Amateur Modding Competition -
Temps 15c idle, 36c load under Prime with 16 threads rocking. This block really does its job big time. 5 x 120 rads, 600mm x 120mm rad surface area helps also. Fans are on the silent profile. Cpu is at 1.35 volts and 3.8 speed, 4.0 is too much for this chip.
Now did have one leak, first time have had one in hardtube, the res stops had to hit the end caps with the pliers to seal them by hand was not enough, Singularity needs to smooth out the threads a little better on the res and block tops some were really hard to tighten in. Other than that the parts are gorgeous plus the options on the outs.Last edited by nass; 05-14-2017, 03:15 PM.Comment
-
Thx Hooded was a hard set of runs first was the bottom outlet to the first rad at the back that took some work to get it too line up and was hard to reach with pump outlet at the back, both rads are tight to each other also. Come out ok I think. It will change a bit once I get a vega. Will be some tight runs to the vid and res.Originally posted by Hooded View PostComment
-
-
What do you mean ?3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 PsuComment
-
I bet Mother's day reservationsOriginally posted by gdesmo View Post
__________________________________________________
Retro Build: Build Log,
Baby Blue Build: Build Log,
Green Lanten Build: Build Log,
Sentinel Build: Build Log,
Venom Build: Build Log,
Silent Sniper Build: Final Video,
Orange Build: Final Video
HTPC Build: Final Video
__________________________________________________Comment
-
Party?Comment
-
-
oh haha. Tube Bending party mess
Comment
-
Managed to get the cpu to 3.9 stable @1.3 volts was at 3.8 on the stock hsf.Comment
-
You better feed her well at a nice place !
3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 PsuComment
-
Ya was mistaken it is @ 1.35v was cpuz showing the abbreviated voltage, hwinfo shows 1.352 v. Ya the extra kick on the voltage is not worth the hundred usually, plus mine at least on air didn't like it even @1.4.Originally posted by Necrodead View Post
We had taco's G, cleaned up after posting that earlier today.Last edited by nass; 05-15-2017, 01:12 AM.Comment
-
This will work for now is one run I need to fix though. The long double 90 from rad to cpu in needs to be redone.
Comment
-
Very nice Nass, love that color!Comment
Comment