Tweet
The best EK DDC anti vibration kit. All you need to do is drill 4 holes for screws.
-
__________________________________________________
Retro Build: Build Log,
Baby Blue Build: Build Log,
Green Lanten Build: Build Log,
Sentinel Build: Build Log,
Venom Build: Build Log,
Silent Sniper Build: Final Video,
Orange Build: Final Video
HTPC Build: Final Video
__________________________________________________ -
thanks Daz. this will be compatible with the XSPC pump top, need to keep it cause its got third port for loop drain.Comment
-
Err... assuming it has same threads as EK....__________________________________________________
Retro Build: Build Log,
Baby Blue Build: Build Log,
Green Lanten Build: Build Log,
Sentinel Build: Build Log,
Venom Build: Build Log,
Silent Sniper Build: Final Video,
Orange Build: Final Video
HTPC Build: Final Video
__________________________________________________Comment
-
-
It is an excellent choice. I tried it with another tank (pump top) from BP that I bought here, and it seemed fine. The only issue was that the included screws that go through the pump housing were a tiny bit too long, so I added a washer on each at the bottom of the pump housing to avoid damaging the acrylic reservoir tank. Worked a charm. I think I had it on the Arc Mini R2 build after I drilled some screw holes 5mm apart in the bottom. Yes that was it.Originally posted by DazMode View PostDS340-E: Core I7 3770K Undervolted at 4.3Ghz, Asrock Z77 Extreme-3, 16GB of Adata XPG V2 gold RAM at 2200mhz, XFX R9 290 with EK water block and (I love) gold backplate, EK tubing, Bitspower and Darkside fittigs, Darkside RGB lighting with handy remote control, WD Black Dual (120GB SSD+1TB mechanical) hard disk, Swiftech PWM fan controller, Windows 7 Ultimate 64-bitComment
-
thanks 10e. good help!
@ Daz, just in case, do you still have TFC Admiral fix kit?
I'll leak test it again, but worth asking.Comment
-
No I used all for fixing.__________________________________________________
Retro Build: Build Log,
Baby Blue Build: Build Log,
Green Lanten Build: Build Log,
Sentinel Build: Build Log,
Venom Build: Build Log,
Silent Sniper Build: Final Video,
Orange Build: Final Video
HTPC Build: Final Video
__________________________________________________Comment
-
Then I hope for no leaks
just to note, typo on store page... Repared...
https://www.dazmode.com/store/produc...e-120mm-black/Comment
-
Looks good Bungz. Don't think it would overheat in that setting.Nova Stryker / Asus Z77 Sabertooth | Intel 3770K | Corsair Vengeance 1600mhz 32Gb | Crucial M5 240Gb | WD Black | Asus R9 390 Strix | CM Storm Stryker | BP Summit EF
Nova Polaris / Asus Maximus Gene VIII | Intel 6600K | Corsair Vengeance 3200mhz 16Gb | Intel M2 240Gb | Toshiba 2tb | EVGA GF 1070 | Fractal Node 804 | Swiftech Apogee XL2Comment
-
ya Neo. was something that came up on FB post.
I kinda don't think so either, but I've got some bucks to spend on this...
... and now a fairly full cart in DazStore!!
Comment
-
Anyone have one of these... want to add it to my drain port, but have really tight tolerance.
could really use actual dimension of port to backface...
https://www.dazmode.com/store/produc...-deluxe-white/Comment
-
im not at my home now, if no one give you the answer this afternoon, i willComment
-
-
I believe it's 3/4" or 19mm
According to my venier caliper it measures .760" ten thousands of an inch larger than 3/4Last edited by Hooded; 02-21-2015, 04:09 PM.Blue Dragon CM690 II an i7 - 960 x58 build
OverKill HTPC - Red Team Build an AMD FX6100 with dual HD 5870's in crossfire.
Canadian Amateur Modding CompetitionComment
-
hmmm. may just need to get one of these to push the rez another 10mm from the Rad.
http://www.frozenqshop.com/extended-mounts/
wonder if I asked FrozenQ nicely if they would make it in clear acrylic?Comment
Comment