If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
3770K IHS removed-Max V gene-2x4gig ram Gskills 2400 Trident X-2x400watt Qmax TEC`s with dew point controller-420 Monsta rad for TEC hotside-360 TFC Xchanger for dual 670`s-RP452 res with 2xD5 vario pumps- HF Supreme with modified plate-DD Cp Pro pump for cold side of TEC and cpu block-Dual CM haf 922`s and a Seasonic X-1250 Psu
I hooked up the G-Vans and plugged my pump into it.
I've dropped the speed ro to 2880 rpm at 8.2volts. Dead silent. This seems to allow the air bubbles a better chance of escaping, rather than being sucked up through the loop.
The micro bubbles are still singing but the song is almost done.
Have you tried pinching the tube to restrict the flow? Has helped me a few times in the past. Just pinch it a bit right before the GPU block to let a little pressure build. Then slowly release it. It also looks like you have a kink between your CPU block and first ram block.
I finally got up the nerve to plug this sucker in. Went very smooth.
I'm here now on my water cooled rig and it's purring along nice and quiet.
Got a few leds to fix. Most likely a bad pin connection on one of the molex plugs. God knows there are enough of them on this build.
I moved Windows from an older OCZ Vertex2 120GB SSD2 to a Kingston HyperX 120GB SSD3.
I love this machine even more now.
Will have to play some Sniper Elite on it to see how it goes.
Comment